Our Technologies
Raito offers extensive experience in ground improvement and soil stabilization techniques for a number of diverse project needs including liquefaction mitigation, excavation support, groundwater cutoff, in-situ stabilization of contaminated soils and more. Our specialized equipment fleet is capable of thoroughly treating a wide range of soil conditions to depths of more than 100 ft, even keying the final product into stiff bearing soil layers or weathered bedrock.
Multi-auger Soil Mixing
DSM is an in-situ soil mixing technology that mixes existing soil with cementitious materials using mixing shafts consisting of auger cutting heads, discontinuous auger flights, and mixing paddles. The mixing equipment varies from single to eight shaft configurations depending on the purpose of the deep mixing. The soil-cement produced generally has higher strength, less compressibility, and lower permeability than the native soils.
Soil Mixing Wall
RSW method mixes in-situ soils with cement grout or other reagents slurries using a multiple shaft auger to produce continuous subsurface soil-cement walls for excavation support, groundwater or underground pollutants control, or ground reinforcement. The soil-cement is usually reinforced with steel H-piles when used for excavation support along with groundwater control.
Single Large Diameter
RAS Column is an advanced deep soil mixing method based on mechanical soil mixing technology to produce soil-cement column of 1.4m to 2.5m diameter. The mixing head is equipped with the counter rotation mechanism. This unique mechanism efficiently breaks and mixes in-situ soil with cement-based reagents, producing more homogenous and higher quality soil-cement columns.
Shallow Soil Mixing
SCM (Surface Compact Mixing) is a method to mechanically mix in-situ soil with cement powder or slurry. SCM provides two different mixing equipments, Rotary Blender and Bucket Mixing, to be selected depending on improvement objectives and depth. The unique mixing mechanism provides efficient, cost effective and quality improvement. Larger plant is not necessary. The mixing device can be attached to a local 0.8-1.9m3 excavator.
Jet Grouting
Jet Grouting is a technique of mixing in-situ soil with the energy of ultra-high pressure jet of slurry. A small-diameter rod drills down to the improvement bottom. Then the rod, while being withdrawn, jets the cement-base slurry and air to produce an improved column. Jet Grouting enables improvement closely contacted to or, in some cases, encompassing existing underground structures without causing damage to them.